Jochen Schleese Saddle Fitting Tip – Skin Irritations and Girths: Part 2

It is important to select the correct girth and billets with buckle placement to avoid pressure points which cause muscle and skin irritation. Girths come in a variety of types, lengths and materials, with different forms and functions.

The more a girth is able to distribute weight over a larger surface area, the more comfortable the horse will be. These are all BSE (both sides elastic) diamond girths with 4,6 and 8 inch sternum shields.

Many horses have an issue with the girth pinching at the elbow (the narrowest spot where the girth naturally sits and where it will always find its way). A correctly shaped girth should displace pressure as evenly as possible along its length. Ideally, it should have a wider surface area along the sternum of the horse, which is the strongest point of contact. These ‘diamond’ girths are anatomically accommodating, narrower at the ends where it sits under the elbow area, and widening to between 4-8 inches at the sternum to displace the pressure evenly.

If the girth is too short, the buckles will pinch (you can test this by lifting your horse’s leg up once you have girthed up) and the horse will not be able to fully extend during movement.

More often, you see girths that are neither wide enough nor long enough, with too much elastic at the buckles. The result is they actually ‘cut’ into the pectoralis muscle. A wider girth is always advantageous. It ensures distribution of pressure and weight over the biggest surface area possible, without impinging on the nerve ends or causing rub marks. It should be narrower at the ends to allow freedom of movement without interference behind the elbows. Elastic should be at both ends so there is a bit of give equally on both sides at the buckles. This is more comfortable for your horse and allows him to breathe better. A long girth should have no more than 2 inches of elastic at the buckles; a short girth no more than 1 inch of elastic (based on industry guidelines for stretch). If the bottom hole of the billets is about 1 inch from the sweat flap after tightening the girth (with long billets/ short girth), there should be maximum 2 to 3 open holes left at the top of the billet. This will ensure elbow freedom and no pressure on the edge of the pectoralis muscle.

https://www.youtube.com/embed/KphXfc8jJ0k

Author of ‘Suffering in Silence – The Saddle fit Link to Physical and Psychological Trauma in Horses’ (2013) Jochen Schleese teaches riders and professionals to recognize saddle fit issues in Saddlefit 4 Life® lectures and seminars. We help you find answers in a personal 80 point Saddle Fit Diagnostic Evaluation.

1-800-225-2242 www.Saddlefit4life.com 

SHARE THIS ARTICLE

Facebook
Twitter
LinkedIn

CATEGORIES

TAGS

RELATED POSTS

DressageAnhidrosis_1
The Non-Sweater Conundrum: Managing Anhidrosis In the Heat
Alice Tarjan (USA)Serenade MFHanoverian
Prolong Your Breeches' Lifespan With These Top Tips
DT_FliesFace
Summer Survival Guide: Fight Flies and Beat the Heat
DT Gallop Poll_ Summer Shopping
DT Gallop Poll: What's On Your Horse-Life Shopping List This Summer?

TRENDING ARTICLES

Screenshot
Introduce Lateral and Circle Work From the Ground
Screenshot
Adult Amateurs: Use Biomechanics to Improve Balance and Communication
Trainer Breakup
Is It Time to Break Up With Your Trainer?
DT-horse-lumps-under-jaw-01
Are lumps or swellings under the jaw reason for concern?
Dressage Today
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.