FOLLOW US

Jochen Schleese Saddle Fitting Tip – Skin Irritations and Girths: Part 2

It is important to select the correct girth and billets with buckle placement to avoid pressure points which cause muscle and skin irritation. Girths come in a variety of types, lengths and materials, with different forms and functions.

The more a girth is able to distribute weight over a larger surface area, the more comfortable the horse will be. These are all BSE (both sides elastic) diamond girths with 4,6 and 8 inch sternum shields.

Many horses have an issue with the girth pinching at the elbow (the narrowest spot where the girth naturally sits and where it will always find its way). A correctly shaped girth should displace pressure as evenly as possible along its length. Ideally, it should have a wider surface area along the sternum of the horse, which is the strongest point of contact. These ‘diamond’ girths are anatomically accommodating, narrower at the ends where it sits under the elbow area, and widening to between 4-8 inches at the sternum to displace the pressure evenly.

If the girth is too short, the buckles will pinch (you can test this by lifting your horse’s leg up once you have girthed up) and the horse will not be able to fully extend during movement.

More often, you see girths that are neither wide enough nor long enough, with too much elastic at the buckles. The result is they actually ‘cut’ into the pectoralis muscle. A wider girth is always advantageous. It ensures distribution of pressure and weight over the biggest surface area possible, without impinging on the nerve ends or causing rub marks. It should be narrower at the ends to allow freedom of movement without interference behind the elbows. Elastic should be at both ends so there is a bit of give equally on both sides at the buckles. This is more comfortable for your horse and allows him to breathe better. A long girth should have no more than 2 inches of elastic at the buckles; a short girth no more than 1 inch of elastic (based on industry guidelines for stretch). If the bottom hole of the billets is about 1 inch from the sweat flap after tightening the girth (with long billets/ short girth), there should be maximum 2 to 3 open holes left at the top of the billet. This will ensure elbow freedom and no pressure on the edge of the pectoralis muscle.

https://www.youtube.com/embed/KphXfc8jJ0k

Author of ‘Suffering in Silence – The Saddle fit Link to Physical and Psychological Trauma in Horses’ (2013) Jochen Schleese teaches riders and professionals to recognize saddle fit issues in Saddlefit 4 Life® lectures and seminars. We help you find answers in a personal 80 point Saddle Fit Diagnostic Evaluation.

1-800-225-2242 www.Saddlefit4life.com 

SHARE THIS ARTICLE

Facebook
Twitter
LinkedIn

CATEGORIES

TAGS

RELATED POSTS

horse week
The Art of Freestyle Dancing with Horses
Matt-and-Cooper-square-2111f9434ab66419cfa7f5801c8ee18e-
The Many Talents of Matt McLaughlin
EjDrOhURby5WH60zFdsl_file-1
Unlock Your Riding Potential with Feldenkrais Awareness Through Movement®
peters
Keeping Up with Steffen Peters

TRENDING ARTICLES

DT-horse-lumps-under-jaw-01
Are lumps or swellings under the jaw reason for concern?
DTMP-150300-HUBERT-01
The Half Halt Simplified
DSC_8604
10 Tips for Better Driving Aids
dressage101arena20metercircles
Dressage Basics: The 20-by-60-Meter Dressage Arena and 20-Meter Circles